6″ Roller Mill
High Volume

The 6” Roller Mill with a 4.4 k.w. single or 3 phase electric motor is rated is rated at 2 ½ – 3 tonne an hour, depending on the type of grain being processed. Grains are feed into the hopper mounted above the rollers, with an adjusting handle allowing the gap between the roller to be varied, to suit the required grain output sample. A discharge auger outlet is mounted in the base of the mill to enable a discharge auger to be fitted.
Can be supplied with PTO drive, 5h.p. or 7.5h.p. electric motor.

  • 2 ½ – 3 tonne an hour
  • 5h.p. or 7.5h.p. electric motor
  • Can be supplied with PTO drive
  • discharge auger outlet is mounted in the base
  • Optional fitted auger

Description

The combination of high output and low horse power makes the roller mill the machine you have been looking for to help solve those feed problems. This is a high capacity machine that will crimp or crack 60 to 120 bags of grain per hour, depending on the sample required.

The larger 2 ½ and 5 tonne machines can have augers fitted or be combined with a feed mixer, with or without load cells to make a complete processing plant. Due to their robust build, solid grooved hollow bar rollers, and large capacity, these roller mills are sold to the dairy industry or large horse studs where high volumes of grain are processed daily. Bagging augers are available but the high output makes bulk handling preferable. Sealed ball bearings are used throughout the mill.

You may also like…

Go to Top